ข้ามไปยังเนื้อหา
ศูนย์รวมความรู้ Tensor Ring ภาษาไทย · อ่านฟรี ครบทั้งพื้นฐาน Cubit EMF งานวิจัย และประสบการณ์ผู้ใช้
Knowledge Hub

Why Tensor Rings Must Not Be Soldered — The Friction-Lock Joint

Why Tensor Rings cannot be soldered: how solder breaks the scalar field per Slim Spurling's theory, and how the friction-lock joint preserves field continuity.

2 พฤษภาคม 2026 อัปเดต 8 พฤษภาคม 2026 อ่าน 5 นาที โดย Anunaki Workshop

🇹🇭 อ่านภาษาไทย — Read in Thai

A common question from newcomers — why doesn’t Anunaki solder the ends of a Tensor Ring? Short answer: because soldering destroys the scalar field the ring is meant to generate. This article explains Slim Spurling’s original principle and how we join the ends correctly using the friction-lock technique.


OM

The Original Principle by Slim Spurling

Slim Spurling, the rediscoverer of modern Tensor Rings, repeatedly emphasized that the loop must be closed by the metal itself — never with foreign materials like lead, silver, or flux. The scalar field flowing inside the ring is disrupted every time it crosses through a region containing different metal.

LAM

Why Solder Destroys the Field

1) Lead is toxic and has a different atomic structure from copper — the scalar current reflects back at the joint. 2) Flux (the soldering aid chemical) leaves chemical residue at the join. 3) Heat from soldering permanently changes the copper crystal structure at that point — the ring is no longer a homogeneous closed conductor — efficiency drops by 50% or more, per Spurling's measurements.

YAM

The Correct Method

  1. Cut wire to a true Sacred Cubit length — never approximate
  2. Twist clockwise per Slim's original method
  3. Form into a circle so the ends meet precisely
  4. Friction-lock — twist the ends into each other tightly until they form one continuous piece

RAM

How Anunaki Joins the Ends

We use a two-pass friction-lock — overlap the wire ends, then compress with a precision tool in the opposite direction. The ends grip without slipping for the lifetime of the ring. Copper purity stays at 99.9% throughout the loop. No foreign metals. No heat-altered crystal. The scalar field flows uniformly around the entire ring.

🌀 Note — If you have a Tensor Ring from another source with a soldered joint, it still functions — but per Spurling’s theory, efficiency drops. Test side-by-side with an unsoldered ring to feel the difference yourself.

⚖️ คำชี้แจงตรงๆ

เราเขียนบทความนี้ด้วยใจเปิด — มีอะไรที่บอกได้ว่ารู้ และมีอะไรที่ยังไม่รู้แน่ชัด:

❌ สิ่งที่เรายังไม่ยืนยัน

  • ยังไม่มี peer-reviewed study ตีพิมพ์ใน journal กระแสหลักที่ยืนยันผล Tensor Ring เชิงคลินิก
  • ผลที่ผู้ใช้รายงานเป็น anecdotal evidence — ไม่ใช่ controlled trial
  • กลไก scalar wave / longitudinal wave ยังเป็น fringe science (Tesla / Reich tradition) ไม่ใช่ mainstream physics
  • เราไม่ได้อ้างว่ารักษาโรค / ทดแทนแพทย์ / มีฤทธิ์ medical device

✅ สิ่งที่เรายืนยันได้

  • ทองแดง 99.9% Pure (ตรวจได้จาก spectrometer)
  • สัดส่วน Sacred Cubit / Lost Cubit / 188 MHz ตรงตามตำรา Slim Spurling
  • Friction-lock joint ไม่บัดกรี — ตามวิธีต้นฉบับ
  • ทดสอบความถี่ด้วย Lecher antenna ก่อนส่ง
  • ผู้ใช้ที่มี pacemaker หรือเครื่องกระตุ้นหัวใจ ควรปรึกษาแพทย์ + เว้นระยะ ≥30 cm
  • ผู้ป่วย Wilson's disease (ไม่สามารถ metabolize ทองแดง) ห้ามสวมใส่ใกล้ผิวต่อเนื่องนาน

Further Reading

📚 อ่านต่อ

’]

🚚
ส่งฟรีสั่งครบ 2,000฿
🛡
ของแท้ 100%ผลิตในไทย
💳
ผ่อน 0%สูงสุด 6 เดือน
💬
ปรึกษาฟรีตอบทุกวัน 9-21น